Browse Categories

Tape Dispensers and Applicators

Equipment/Labeling Systems/Tach-It/Tape Dispensers and Applicators 
Viewing Page 1 of 1 (4 results)
Tach-It 6425 Auto L-Clip Tape Applicator

Tach-It 6425 Auto L-Clip Tape Applicator

Item #: 602005

The Tach-It Model #6425 L-Clip Box Sealer securely applies various lengths and widths of most types of packaging tapes, including filament tapes, up to 2 inch wide from the side to the bottom of a box. Perfect for sealing all types of corrugated, chipboard boxes and cartons, the Tach-It Model #6425 is simple to use. The operator places the box to be sealed onto the platform of the machine and pushes the box forward against the upper pressure pad. This actuates the machine and the desired length of tape is securely applied. Using only 110 volt AC and most industry standard tapes including filament tapes from 1/2 inch wide up to 2 inch wide and our large roll capacity will handle machine length rolls of tape up to 13 inches in diameter. The Tach-It Model #6425 can seal up to 40 packages per minute increasing operator productivity over hand taping, is easily adjusted for tape length and width, requires no training or tools for tape changes, and has a small table top design which allows it to be used anywhere it is needed.

Tach-it 6425 Automatic L-Clip Tape Applicator

Box Selaer up to 2in wide tapes / Model #6425

  • Applies a length of tape from the side to the bottom of a box creating a secure and economical closure.
  • Perfect for many packaging applications.
  • Activated by simply pushing a box against a micro-switch.
  • Seals most types of boxes including chipboard and corrugated.
  • Works with filament, reinforced and non-reinforced tapes up to 2 inch wide.
  • Large roll capacity allows for use of machine length rolls of tape up to 13 inches in diameter for less tape changeovers.
  • Can feed up to 3 3/4 inch tape for a secure closure.
  • Heavy duty construction and small table top design.
  • Can be flush mounted to a table.
  • Economical, saves tape and increases productivity.
Call for Availability
/EA
NOT IN STOCK
Tach-It 6125 Automatic Definite Length

Tach-It 6125 Automatic Definite Length

Item #: 603570

Perfect for industrial, contract packaging, shipping, assembly, wire harnessing, electrical, retail or anywhere a cut piece of tape is needed. The Tach-It Model #6125 can cut filament, kapton, acetate, glass cloth, double sided tape, and most other types of tape up to 2 inch wide. Dual sensors allow the Model #6125 to work with 1 roll of tape up to 2 inch wide or 2 rolls of tape up to 1 inch wide each. The unique cradle device means that this machine can work with any core size tape and large roll sizes. Able to work with both pressure sensitive and non-pressure sensitive items, the model #6125 has both manual and semi-automatic modes, 6 pre-set length adjustments so you just press a button to the desired pre-set and the desired length is stored, is small and compact, and has an easy to use control panel with LED indicators.

Tach-It 6125 Automatic Definite Length Tape Dispenser

Tape Dispenser 1/4 in to 2 in Tapes. Model 6125

  • Has 6 pre-sets for various lengths of tape to be dispensers.
  • Works on pressure sensitive and non-pressure sensitive products such as cohesive paper.
  • Cuts most types of standard tapes including packaging tapes, filament tapes, acetate, masking, cloth and a large variety of others.
  • Can cut 1 roll of tape up to 2 inch wide or 2 rolls of tape up to 1 inch wide each.
  • Has manual mode for random lengths of tapes and automatic mode for pre-determined lengths of tape.
  • Small table top design.
  • Modes: manual and semi-automatic
Call for Availability
/EA
NOT IN STOCK
Tach-It 6115 Heavy Duty Automatic Tape

Tach-It 6115 Heavy Duty Automatic Tape

Item #: 610599

This heavy duty automatic feed and cut definite length tape dispenser can work with 1 roll of tape up to 2 inch wide or 2 rolls of tape up to 1 inch wide each. As the most durable definite length dispenser due to the all metal internal components, the 6115 is reliable and easy to use with push button and LED controls and 4 programmable memory presets. The Tach-It Model 6115 can cut most types of pressure sensitive tape from 1/2 inch to 39.3 inches in length. The 6115 has 3 modes. In random mode, the operator presses the feed button until the desired length of tape is fed and then presses the cut button to cut the tape. In Semi-Automatic mode, the pre-determined length of tape is fed and cut and removed from the machine. When the operator is ready for the next length of tape, they press the cut button and the tape is fed to the pre-determined length. In Automatic mode, the model #6115 will feed the tape to the pre-determined length and once removed from the machine, the next piece of tape is immediately fed. Small bench top design, exclusive safety shield to protect the operator, and adjustable tape pressure to ensure positive tape feeding are all advantages of this machine.

Tach-It 6115 Heavy Duty Automatic Definite Length Tape Dispenser

Dispenser Definite Length

  • Perfect for industrial, contract packaging, shipping, assembly, wire harnessing, retail or anywhere a cut length of tape is needed.
  • Works with virtually any type of packaging tape including filament tape, up to 2” wide. Can cut tapes up to 39.3” (999 mm) long.
  • Works with 1 roll of tape up to 2” wide or 2 rolls of tape up to 1” wide each.
  • Guillotine Cutter for a straight clean cut to virtually any type of packaging tape.
  • All steel gears and shafts for durability.
  • Encoder accuracy for consistent tape lengths.
  • 3 modes: manual, semi-automatic & automatic.
  • LED lengrh indicator.
  • 4 memory preset buttons.
  • Buttons to set for length, manual cut and for removing the tape from the machine.
Call for Availability
/EA
NOT IN STOCK
Tach-It 6180 HD Automatic LengthTape

Tach-It 6180 HD Automatic LengthTape

Item #: 611931

This heavy duty automatic feed and cut definite length tape dispenser can dispense and cut most commonly found packaging tapes and materials up to 3 1/8 inch wide. As the most durable definite length dispenser due to the all metal internal components, the 6180 is reliable and easy to use with push button and LED controls and 4 programmable memory presets. The Tach-It Model 6180 can cut from 1/2 inch to 39.3 inches in length. The 6180 has 3 modes. In random mode, the operator presses the feed button until the desired length of tape is fed and then presses the cut button to cut the tape. In Semi-Automatic mode, the pre-determined length of tape is fed and cut and removed from the machine. When the operator is ready for the next length of tape, they press the cut button and the tape is fed to the pre-determined length. In Automatic mode, the model #6180 will feed the tape to the pre-determined length and once removed from the machine, the next piece of tape is immediately fed. Small bench top design, unique cradle design that holds the roll of tape and allows for large roll capacity without any concern for core size and adjustable tape pressure to ensure positive tape feeding are all advantages of this machine.

Tach-It 6180 Heavy Duty Automatic Definite Length Tape Dispenser

Dispenser

  • Heavy Duty will All Metal Gears and Shafts.
  • 4 programmable memory presets for tape lengths.
  • Can feed tape up to 3 1/8 inches in width.
  • 3 Modes including Automatic which feeds and cuts the next piece of tape as the previous one is removed.
  • Can cut most types of tapes including carton sealing, packaging, filament, acetate, masking, flat back, various masking materials and many others.
  • Easy to read LED and push button controls.
  • Adjustment for different thicknesses of tapes for positive feeding.
  • Available in various widths based upon your specific application.
Call for Availability
/EA
NOT IN STOCK